Zibo Deyuan Metal Material Co.,Ltd
Contact US
Address: Gezhuang Villige of Shiqiao Town, Yiyuan County, Zibo City, Shandong Province, China
TEL: +86-533-3230567
FAX : +86-533-3230568
Sales Manager Erin Xue:
+86-13811322460
Home > Products > CP manufacturers

CP manufacturers

  • Magnesium Ribbon Anode

    Contact NowMagnesium Ribbon AnodeThe conventional magnesium cast anode is an economical and dependable source of current in soil and water of comparatively low electrolytic resistivity. However, at higher resistivity, the problem becomes supplying enough current for protection without installing an excessive weight of anodes. In this case magnesium ribbon anodes offer minimum resistance to earth per unit weight of anode installed.Read More

  • Extruded Magnesium Anode Rod AZ31 for Water Heaters

    Contact NowExtruded Magnesium Anode Rod AZ31 for Water HeatersExtruded Magnesium Anode Extruded Magnesium Anodes are usually used in a small diameter anodes requirement, such as for water heaters, boilers, water storage tanks, heat plumbing, gas stations CP systems. Chemical composition of Extruded anode, % Extruded Anode Specification and Dimension -* We...Read More

  • Aluminum Anode For Ballast Tank

    Contact NowAluminum Anode For Ballast TankAluminum Anodes are mainly used for the metal anti-corrosion & cathodic protection of ships, mechanical equipment, offshore engineering and port facilities in seawater as well as the protection of pipes, cables and other facilities in mud. Aluminum Anodes are designed for optimum performance under a variety of environmental conditions and temperature ranges. Cast in a variety of alloys, sizes and weights, Aluminum anodes provide maximum performance in seawater and brackish environments.Read More

  • Standard/Normal Potential (H1) Casting Magnesium Anode

    Contact NowStandard/Normal Potential (H1) Casting Magnesium AnodeHigh Potential (HP) Casting Magnesium Anode is the best choice for CP systems in high resistivity soil, while Standard/Normal Potential (H1) Casting Magnesium Anode is the best choice for CP systems in low resistivity soil. Typically, Standard/Normal Potential (H1) Casting Magnesium Anodes produce a minimum open circuit potential of 1.52 volts with respect to CaSO4. Therefore, the driving potential of the H-1 cathodic protection anodes exceeds that of Aluminum or Zinc, but is still lower than a high potential magnesium anode.Read More

  • Aluminum Anode For Ships

    Contact NowAluminum Anode For ShipsAluminum anodes for ships Deyuan offers a series of Aluminum anode which is made from different kinds of alloy suitable to use in seawater environment.The anode have satisfactory circuit potential and capacity which can fulfill your high level requirement.Please find our typical anode...Read More

  • High Potential (HP) Casting Magnesium Anode

    Contact NowHigh Potential (HP) Casting Magnesium AnodeMagnesium anode is the most common material used as sacrificial anode in cathodic protection system because of its higher driving voltage, easy installation and limited maintenance. The high potential magnesium anodes are produced with high quality and high purity magnesium alloy material, complying with the ASTM97-98 standard. HP anode has excellent electrochemical performance due to the specific production process. During the actual application process, the actual measurement working potential is between -1.7V to 1.75V, which have more obvious protection effect of the target structure.Read More

  • Aluminum Anode For Seawater And Offshore Structures

    Contact NowAluminum Anode For Seawater And Offshore StructuresAluminum Anodes are designed for optimum performance under a variety of environmental conditions and temperature ranges. Cast in a variety of alloys, sizes and weights, Aluminum anodes provide maximum performance in seawater and brackish environments.Read More