Zibo Deyuan Metal Material Co.,Ltd
Contact US
Address: Gezhuang Villige of Shiqiao Town, Yiyuan County, Zibo City, Shandong Province, China
TEL: +86-533-3230567
FAX : +86-533-3230568
Sales Manager Erin Xue:
+86-13811322460
Home > Products > HP mg anode

HP mg anode

  • High Silicon Cast Iron Tubular Anode

    Contact NowHigh Silicon Cast Iron Tubular AnodeThanks for the progress of cast technology, tubular anode was invented after some years of rod anode. And now the tubular anode is very well recognized by cathodic protection designers and engineers and became the most popular for deep wells. Deyuan manufacture a full line of tubular anodes using improved centrifugal casting technique, this helps us to bring our anode quality to a new level compare to gravity casting.Read More

  • Extruded Magnesium Anode Rod AZ31 for Water Heaters

    Contact NowExtruded Magnesium Anode Rod AZ31 for Water HeatersExtruded Magnesium Anode Extruded Magnesium Anodes are usually used in a small diameter anodes requirement, such as for water heaters, boilers, water storage tanks, heat plumbing, gas stations CP systems. Chemical composition of Extruded anode, % Extruded Anode Specification and Dimension -* We...Read More

  • Prepackaged Magnesium Anode

    Contact NowPrepackaged Magnesium AnodeDEYUAN prepackaged anodes are made of recyclable materials or easily decomposable materials and the content of harmful elements in the backfill is lower than safety standards, which will not bring any pollution to the surrounding. The available cables type (insulation/sheath) are: PVC/PVC, XLPE/PVC, HMWPE etc. with any required size.Read More

  • Magnesium(Mg) Alloy Sheet/Plate

    Contact NowMagnesium(Mg) Alloy Sheet/PlateMagnesium (Mg) Alloy Sheet has received increasing attention in automotive, transportation, and aerospace industries. Deyuan has three size Magnesium (Mg) Alloy Sheet: thin(3-100mm), medium, and thick(300*700mm), and enjoys the advantages of no crack, no pores, no slag, tissue uniform, good thermal conductivity, high strength and uniform grain.Read More

  • HP Casting Magnesium Anode For Cathodic Protection

    Contact NowHP Casting Magnesium Anode For Cathodic Protectionhigh potential casting magnesium anode Magnesium anode is the most common material used as sacrificial anode in cathodic protection system because of its higher driving voltage, easy installation and limited maintenance.Read More

  • Standard/Normal Potential (H1) Casting Magnesium Anode

    Contact NowStandard/Normal Potential (H1) Casting Magnesium AnodeHigh Potential (HP) Casting Magnesium Anode is the best choice for CP systems in high resistivity soil, while Standard/Normal Potential (H1) Casting Magnesium Anode is the best choice for CP systems in low resistivity soil. Typically, Standard/Normal Potential (H1) Casting Magnesium Anodes produce a minimum open circuit potential of 1.52 volts with respect to CaSO4. Therefore, the driving potential of the H-1 cathodic protection anodes exceeds that of Aluminum or Zinc, but is still lower than a high potential magnesium anode.Read More

  • Zinc Anode For Condenser

    Contact NowZinc Anode For CondenserZinc anode for condensers Zinc anodes has been used as a sacrificial anode material in seawater since 1824, when Sir Humphery Davy used zinc blocks to prevent corrosion of the copper cladding on the hulls of British warships. Modern zinc anodes used for cathodic protection are cast from high...Read More

  • Casting Magnesium Anode Rod AZ63 For Water Heaters

    Contact NowCasting Magnesium Anode Rod AZ63 For Water HeatersWater heater anode rod is probably the most important part with only one purpose to protect metal tank from corrosion.DEYUAN supplies extruded magnesium anodes (AZ31 alloy) and cast magnesium anodes (AZ63 alloy) for water heaters. Extruded Magnesium anodes have high surface and length ratios in relation to cross sectional size. This allows these anodes to deliver a greater amount of current per weight than cast anodes.Read More

  • Zinc Ribbon Anode

    Contact NowZinc Ribbon AnodeZinc Ribbon Anode Zinc ribbon anodes are used in cathodic protection on buried pipelines, above ground storage tanks, and other CP systems. Deyuan produces Zn ribbon anodes according to ASTM-B-418-95a type I and type II standard. Chemical composition of Zn ribbon anode, % Electrochemical...Read More

  • High Silicon Cast Iron Rod Anode

    Contact NowHigh Silicon Cast Iron Rod AnodeDEYUAN HSCI Anodes are produced both in solid rod stick and tubular form. Chill Casting is the dominant method for our anode products with more consistent weight, greater density and better performance. DEYUAN supplies Single Head HSCI Rod Stick Anode and Double Heads HSCI Rod Stick Anode, based upon the shape of our rod anode. Depending on customer's requirements, we can supply HSCI Anode installed either with or without cable.Read More