Zibo Deyuan Metal Material Co.,Ltd
Contact US
Address: Gezhuang Villige of Shiqiao Town, Yiyuan County, Zibo City, Shandong Province, China
TEL: +86-533-3230567
FAX : +86-533-3230568
Sales Manager Erin Xue:
+86-13811322460
Home > Products > Magnesium Alloy Anode manufacturers

Magnesium Alloy Anode manufacturers

  • Zinc Anode For Condenser

    Contact NowZinc Anode For CondenserZinc anode for condensers Zinc anodes has been used as a sacrificial anode material in seawater since 1824, when Sir Humphery Davy used zinc blocks to prevent corrosion of the copper cladding on the hulls of British warships. Modern zinc anodes used for cathodic protection are cast from high...Read More

  • Aluminum Anode For Seawater And Offshore Structures

    Contact NowAluminum Anode For Seawater And Offshore StructuresAluminum Anodes are designed for optimum performance under a variety of environmental conditions and temperature ranges. Cast in a variety of alloys, sizes and weights, Aluminum anodes provide maximum performance in seawater and brackish environments.Read More

  • Standard/Normal Potential (H1) Casting Magnesium Anode

    Contact NowStandard/Normal Potential (H1) Casting Magnesium AnodeHigh Potential (HP) Casting Magnesium Anode is the best choice for CP systems in high resistivity soil, while Standard/Normal Potential (H1) Casting Magnesium Anode is the best choice for CP systems in low resistivity soil. Typically, Standard/Normal Potential (H1) Casting Magnesium Anodes produce a minimum open circuit potential of 1.52 volts with respect to CaSO4. Therefore, the driving potential of the H-1 cathodic protection anodes exceeds that of Aluminum or Zinc, but is still lower than a high potential magnesium anode.Read More

  • Zinc Ribbon Anode

    Contact NowZinc Ribbon AnodeZinc Ribbon Anode Zinc ribbon anodes are used in cathodic protection on buried pipelines, above ground storage tanks, and other CP systems. Deyuan produces Zn ribbon anodes according to ASTM-B-418-95a type I and type II standard. Chemical composition of Zn ribbon anode, % Electrochemical...Read More

  • Zinc Anode For Platform And Marine Structure

    Contact NowZinc Anode For Platform And Marine StructureSaltwater is very corrosive and will quickly rust the metal, unless the galvanic coupling (voltaic couple) is formed with the Sacrificial Zinc Anode, which can greatly increasing its useful life in the water. With high capacity, current efficiency and high machine performance, Sacrificial Zinc Anodes are widely used in cathodic protection of tank bottom, pipeline, and water pipe in soil environments.Read More

  • Mixed Metal Oxide Wire Anode

    Contact NowMixed Metal Oxide Wire AnodeApplication of Mixed Metal Oxide (MMO) Wire Anodes 1) -for above ground storage tank bottoms 2) -for reinforced concrete structures 3) -for underground storage tank 4) -for fine sand environmentRead More

  • High Silicon Cast Iron Tubular Anode

    Contact NowHigh Silicon Cast Iron Tubular AnodeThanks for the progress of cast technology, tubular anode was invented after some years of rod anode. And now the tubular anode is very well recognized by cathodic protection designers and engineers and became the most popular for deep wells. Deyuan manufacture a full line of tubular anodes using improved centrifugal casting technique, this helps us to bring our anode quality to a new level compare to gravity casting.Read More

  • Graphite Anode

    Contact NowGraphite AnodeGraphite Anode is a conductive part of an electrical system or medium. It is commonly used in cathodic protection (CP) systems. This impressed current anode is also used to protect the structural integrity of buildings and metals, especially those that are underwater or underground. Within a CP system, the Graphite Anode is the part that outputs the protective current. They can be installed in dry soil conditions and water or wet environments. They can also provide cathodic protection when installed within high chloride environments.Read More

  • Prepackaged Magnesium Anode

    Contact NowPrepackaged Magnesium AnodeDEYUAN prepackaged anodes are made of recyclable materials or easily decomposable materials and the content of harmful elements in the backfill is lower than safety standards, which will not bring any pollution to the surrounding. The available cables type (insulation/sheath) are: PVC/PVC, XLPE/PVC, HMWPE etc. with any required size.Read More

  • Aluminum Anode For Ballast Tank

    Contact NowAluminum Anode For Ballast TankAluminum Anodes are mainly used for the metal anti-corrosion & cathodic protection of ships, mechanical equipment, offshore engineering and port facilities in seawater as well as the protection of pipes, cables and other facilities in mud. Aluminum Anodes are designed for optimum performance under a variety of environmental conditions and temperature ranges. Cast in a variety of alloys, sizes and weights, Aluminum anodes provide maximum performance in seawater and brackish environments.Read More