Zibo Deyuan Metal Material Co.,Ltd
Contact US
Address: Gezhuang Villige of Shiqiao Town, Yiyuan County, Zibo City, Shandong Province, China
TEL: +86-533-3230567
FAX : +86-533-3230568
Sales Manager Erin Xue:
+86-13811322460
Home > Products > Mg alloy scrificial anode

Mg alloy scrificial anode

  • HP Casting Magnesium Anode For Cathodic Protection

    Contact NowHP Casting Magnesium Anode For Cathodic Protectionhigh potential casting magnesium anode Magnesium anode is the most common material used as sacrificial anode in cathodic protection system because of its higher driving voltage, easy installation and limited maintenance.Read More

  • Standard/Normal Potential (H1) Casting Magnesium Anode

    Contact NowStandard/Normal Potential (H1) Casting Magnesium AnodeHigh Potential (HP) Casting Magnesium Anode is the best choice for CP systems in high resistivity soil, while Standard/Normal Potential (H1) Casting Magnesium Anode is the best choice for CP systems in low resistivity soil. Typically, Standard/Normal Potential (H1) Casting Magnesium Anodes produce a minimum open circuit potential of 1.52 volts with respect to CaSO4. Therefore, the driving potential of the H-1 cathodic protection anodes exceeds that of Aluminum or Zinc, but is still lower than a high potential magnesium anode.Read More

  • High Potential (HP) Casting Magnesium Anode

    Contact NowHigh Potential (HP) Casting Magnesium AnodeMagnesium anode is the most common material used as sacrificial anode in cathodic protection system because of its higher driving voltage, easy installation and limited maintenance. The high potential magnesium anodes are produced with high quality and high purity magnesium alloy material, complying with the ASTM97-98 standard. HP anode has excellent electrochemical performance due to the specific production process. During the actual application process, the actual measurement working potential is between -1.7V to 1.75V, which have more obvious protection effect of the target structure.Read More

  • Casting Magnesium Anode Rod AZ63 For Water Heaters

    Contact NowCasting Magnesium Anode Rod AZ63 For Water HeatersWater heater anode rod is probably the most important part with only one purpose to protect metal tank from corrosion.DEYUAN supplies extruded magnesium anodes (AZ31 alloy) and cast magnesium anodes (AZ63 alloy) for water heaters. Extruded Magnesium anodes have high surface and length ratios in relation to cross sectional size. This allows these anodes to deliver a greater amount of current per weight than cast anodes.Read More

  • Extruded Magnesium Anode Rod AZ31 for Water Heaters

    Contact NowExtruded Magnesium Anode Rod AZ31 for Water HeatersExtruded Magnesium Anode Extruded Magnesium Anodes are usually used in a small diameter anodes requirement, such as for water heaters, boilers, water storage tanks, heat plumbing, gas stations CP systems. Chemical composition of Extruded anode, % Extruded Anode Specification and Dimension -* We...Read More

  • Prepackaged Magnesium Anode

    Contact NowPrepackaged Magnesium AnodeDEYUAN prepackaged anodes are made of recyclable materials or easily decomposable materials and the content of harmful elements in the backfill is lower than safety standards, which will not bring any pollution to the surrounding. The available cables type (insulation/sheath) are: PVC/PVC, XLPE/PVC, HMWPE etc. with any required size.Read More

  • Magnesium Ribbon Anode

    Contact NowMagnesium Ribbon AnodeThe conventional magnesium cast anode is an economical and dependable source of current in soil and water of comparatively low electrolytic resistivity. However, at higher resistivity, the problem becomes supplying enough current for protection without installing an excessive weight of anodes. In this case magnesium ribbon anodes offer minimum resistance to earth per unit weight of anode installed.Read More